VERSABAR SMALL DIAMETER CARBIDE SHANK

VersaBar is ToolSaver's revolutionary new Small Diameter Interchangeable Head System ranging from 3/8" to 1"

The heads utilize ANSI standard inserts and components

Exactly what your shop uses now!

DOES YOUR SHOP UTILIZE HIGH PERFORMANCE SMALL DIAMETER CARBIDE BORING BARS?

If so you will be excited to know that the next time you send your bars to us for repair, we can convert your crashed or seldom used carbide or heavy metal shank to accept VersaBar Interchangeable Heads!

1 Your expensive carbide shanks will now have the versatility of accepting heads in a variety of different pocket configurations, and right or left hand heads fit the same bar.

2 When the pocket wears, simply replace the head for a fraction of conventional bar cost.

3 Cut downtime associated with removing a conventional bar from your machine's turret by as much as 90 percent. With VersaBar, you leave the shank in the machine and simply replace the head with 1 screw.

4 Increased pocket life. Conventional brazed type heads anneal during the brazing process. VersaBar heads screw on and are produced to industry standard hardness for maximum pocket performance. So, VersaBar heads provide vastly improved pocket life compared to your conventional brazed bars.